ZONE IMAGING Eco Zonefix zum Ansatz von 1000 ml

MSDS DE
MSDS EN
MSDS FR
PDF-Datasheet
Zone Imaging Eco Zonefiis an eco-friendly, odourless, alkaline, non-hardening, rapid fixer that comes in powder form.
It is diluted with water to make one litre of stock solution for ready use.
-Ideal for both B&W film developed in either pyro/catechol staining or conventional developers and B&W paper developer
-Low odour, doesn’t require acidic stop bath, fast washing out times, long shelf life and designed for soft and hard water up to 500ppm
-Sodium thiosulphate based, free from: borate derivatives, non-biodegradable EDTA/DPTA based chelating agents, phosphates, acetic acid,
known carcinogens and mutagens
This fixer was designed for optimal fixing for film, RC, and FB papers with fast washing out times with both conventional non-staining film/paper
developers and pyro/catechol based staining film developers.
It boasts long shelf life, high capacity, compatible with soft to very hard tap water up to a hardness of 500ppm, and easy transport for
travelling to suit all consumers’ needs.
This fixer is sodium thiosulphate based and free from: borate derivatives, non-biodegradable DPTA and EDTA, phosphates, acetic acid,
known carcinogens and mutagens to make it more friendly to the environment.
By having little odour, this fixer will provide a more pleasant working environment in the darkroom. The slight alkaline nature of the
fixer makes film more resistant to over-fixing and fast washing out for film and paper without a need for hypo-clear.
An acid stop bath is not required and water stop is perfectly sufficient meaning less chemicals are required.
By being non-hardening, this fixer allows for easier bleaching and toning when printing.
The powder has been formulated and packaged in a way to minimise dust entering the air when pouring the contents to make it more user
friendly and meet standards for educational institutions.
Mixing Instructions
1. Prepare approximately 700ml (23.6 fluid ounces) of warm water around 30°C +-3°C (86°F +-5°F) in a measuring container.
2. Slowly pour the contents of Part A into the water and stir continuously until it is mostly dissolved,
this will take approximately 30-45 seconds.
3. Slowly pour the contents of Part B to the solution.
4. Add warm water to make a total of 1 litre (33.8 fluid ounces).
5. Stir continuously until all the powder has dissolved, this will take approximately 60-90 seconds.
The final temperature of the solution will be approximately 20°C +-2°C (68°F +-4°F) for ready use.
Grundpreis gemäß PAngV.: 7,95 EUR pro Liter
Hinweise zur Entsorgung von Foto-Chemikalien finden Sie im Sicherheitsdatenblatt (MSDS) welches Sie oben herunterladen oder auf den Webseiten des jeweiligen Herstellers finden können.